本文为作者原创,转载请注明出处:https://www.cnblogs.com/leisure_chn/p/10584925.html
FFmpeg编解码处理系列笔记:
[0]. FFmpeg时间戳详解
[1]. FFmpeg编解码处理1-转码全流程简介
[2]. FFmpeg编解码处理2-编解码API详解
[3]. FFmpeg编解码处理3-视频编码
[4]. FFmpeg编解码处理4-音频编码
基于FFmpeg 4.1版本。
4. 编解码API详解
解码使用 avcodec_send_packet() 和 avcodec_receive_frame() 两个函数。
编码使用 avcodec_send_frame() 和 avcodec_receive_packet() 两个函数。
4.1 API定义
4.1.1 avcodec_send_packet()
/**
* Supply raw packet data as input to a decoder.
*
* Internally, this call will copy relevant AVCodecContext fields, which can
* influence decoding per-packet, and apply them when the packet is actually
* decoded. (For example AVCodecContext.skip_frame, which might direct the
* decoder to drop the frame contained by the packet sent with this function.)
*
* @warning The input buffer, avpkt->data must be AV_INPUT_BUFFER_PADDING_SIZE
* larger than the actual read bytes because some optimized bitstream
* readers read 32 or 64 bits at once and could read over the end.
*
* @warning Do not mix this API with the legacy API (like avcodec_decode_video2())
* on the same AVCodecContext. It will return unexpected results now
* or in future libavcodec versions.
*
* @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
* before packets may be fed to the decoder.
*
* @param avctx codec context
* @param[in] avpkt The input AVPacket. Usually, this will be a single video
* frame, or several complete audio frames.
* Ownership of the packet remains with the caller, and the
* decoder will not write to the packet. The decoder may create
* a reference to the packet data (or copy it if the packet is
* not reference-counted).
* Unlike with older APIs, the packet is always fully consumed,
* and if it contains multiple frames (e.g. some audio codecs),
* will require you to call avcodec_receive_frame() multiple
* times afterwards before you can send a new packet.
* It can be NULL (or an AVPacket with data set to NULL and
* size set to 0); in this case, it is considered a flush
* packet, which signals the end of the stream. Sending the
* first flush packet will return success. Subsequent ones are
* unnecessary and will return AVERROR_EOF. If the decoder
* still has frames buffered, it will return them after sending
* a flush packet.
*
* @return 0 on success, otherwise negative error code:
* AVERROR(EAGAIN): input is not accepted in the current state - user
* must read output with avcodec_receive_frame() (once
* all output is read, the packet should be resent, and
* the call will not fail with EAGAIN).
* AVERROR_EOF: the decoder has been flushed, and no new packets can
* be sent to it (also returned if more than 1 flush
* packet is sent)
* AVERROR(EINVAL): codec not opened, it is an encoder, or requires flush
* AVERROR(ENOMEM): failed to add packet to internal queue, or similar
* other errors: legitimate decoding errors
*/
int avcodec_send_packet(AVCodecContext *avctx, const AVPacket *avpkt);
4.1.2 avcodec_receive_frame()
/**
* Return decoded output data from a decoder.
*
* @param avctx codec context
* @param frame This will be set to a reference-counted video or audio
* frame (depending on the decoder type) allocated by the
* decoder. Note that the function will always call
* av_frame_unref(frame) before doing anything else.
*
* @return
* 0: success, a frame was returned
* AVERROR(EAGAIN): output is not available in this state - user must try
* to send new input
* AVERROR_EOF: the decoder has been fully flushed, and there will be
* no more output frames
* AVERROR(EINVAL): codec not opened, or it is an encoder
* other negative values: legitimate decoding errors
*/
int avcodec_receive_frame(AVCodecContext *avctx, AVFrame *frame);
4.1.3 avcodec_send_frame()
/**
* Supply a raw video or audio frame to the encoder. Use avcodec_receive_packet()
* to retrieve buffered output packets.
*
* @param avctx codec context
* @param[in] frame AVFrame containing the raw audio or video frame to be encoded.
* Ownership of the frame remains with the caller, and the
* encoder will not write to the frame. The encoder may create
* a reference to the frame data (or copy it if the frame is
* not reference-counted).
* It can be NULL, in which case it is considered a flush
* packet. This signals the end of the stream. If the encoder
* still has packets buffered, it will return them after this
* call. Once flushing mode has been entered, additional flush
* packets are ignored, and sending frames will return
* AVERROR_EOF.
*
* For audio:
* If AV_CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
* can have any number of samples.
* If it is not set, frame->nb_samples must be equal to
* avctx->frame_size for all frames except the last.
* The final frame may be smaller than avctx->frame_size.
* @return 0 on success, otherwise negative error code:
* AVERROR(EAGAIN): input is not accepted in the current state - user
* must read output with avcodec_receive_packet() (once
* all output is read, the packet should be resent, and
* the call will not fail with EAGAIN).
* AVERROR_EOF: the encoder has been flushed, and no new frames can
* be sent to it
* AVERROR(EINVAL): codec not opened, refcounted_frames not set, it is a
* decoder, or requires flush
* AVERROR(ENOMEM): failed to add packet to internal queue, or similar
* other errors: legitimate decoding errors
*/
int avcodec_send_frame(AVCodecContext *avctx, const AVFrame *frame);
4.1.4 avcodec_receive_packet()
/**
* Read encoded data from the encoder.
*
* @param avctx codec context
* @param avpkt This will be set to a reference-counted packet allocated by the
* encoder. Note that the function will always call
* av_frame_unref(frame) before doing anything else.
* @return 0 on success, otherwise negative error code:
* AVERROR(EAGAIN): output is not available in the current state - user
* must try to send input
* AVERROR_EOF: the encoder has been fully flushed, and there will be
* no more output packets
* AVERROR(EINVAL): codec not opened, or it is an encoder
* other errors: legitimate decoding errors
*/
int avcodec_receive_packet(AVCodecContext *avctx, AVPacket *avpkt);
4.2 API使用说明
4.2.1 解码API使用详解
关于 avcodec_send_packet() 与 avcodec_receive_frame() 的使用说明:
[1] 按 dts 递增的顺序向解码器送入编码帧 packet,解码器按 pts 递增的顺序输出原始帧 frame,实际上解码器不关注输入 packe t的 dts(错值都没关系),它只管依次处理收到的 packet,按需缓冲和解码
[2] avcodec_receive_frame() 输出 frame 时,会根据各种因素设置好 frame->best_effort_timestamp(文档明确说明),实测 frame->pts 也会被设置(通常直接拷贝自对应的 packet.pts,文档未明确说明)用户应确保 avcodec_send_packet() 发送的 packet 具有正确的 pts,编码帧 packet 与原始帧 frame 间的对应关系通过 pts 确定
[3] avcodec_receive_frame() 输出 frame 时,frame->pkt_dts 拷贝自当前avcodec_send_packet() 发送的 packet 中的 dts,如果当前 packet 为 NULL(flush packet),解码器进入 flush 模式,当前及剩余的 frame->pkt_dts 值总为 AV_NOPTS_VALUE。因为解码器中有缓存帧,当前输出的 frame 并不是由当前输入的 packet 解码得到的,所以这个 frame->pkt_dts 没什么实际意义,可以不必关注
[4] avcodec_send_packet() 发送第一个 NULL 会返回成功,后续的 NULL 会返回 AVERROR_EOF
[5] avcodec_send_packet() 多次发送 NULL 并不会导致解码器中缓存的帧丢失,使用 avcodec_flush_buffers() 可以立即丢掉解码器中缓存帧。因此播放完毕时应 avcodec_send_packet(NULL) 来取完缓存的帧,而 SEEK 操作或切换流时应调用 avcodec_flush_buffers() 来直接丢弃缓存帧
[6] 解码器通常的冲洗方法:调用一次 avcodec_send_packet(NULL)(返回成功),然后不停调用 avcodec_receive_frame() 直到其返回 AVERROR_EOF,取出所有缓存帧,avcodec_receive_frame() 返回 AVERROR_EOF 这一次是没有有效数据的,仅仅获取到一个结束标志
4.2.2 编码API使用详解
关于 avcodec_send_frame() 与 avcodec_receive_packet() 的使用说明:
[1] 按 pts 递增的顺序向编码器送入原始帧 frame,编码器按 dts 递增的顺序输出编码帧 packet,实际上编码器关注输入 frame 的 pts 不关注其 dts,它只管依次处理收到的 frame,按需缓冲和编码
[2] avcodec_receive_packet() 输出 packet 时,会设置 packet.dts,从 0 开始,每次输出的 packet 的 dts 加 1,这是视频层的 dts,用户写输出前应将其转换为容器层的 dts
[3] avcodec_receive_packet() 输出 packet 时,packet.pts 拷贝自对应的 frame.pts,这是视频层的 pts,用户写输出前应将其转换为容器层的 pts
[4] avcodec_send_frame() 发送 NULL frame 时,编码器进入 flush 模式
[5] avcodec_send_frame() 发送第一个 NULL 会返回成功,后续的 NULL 会返回 AVERROR_EOF
[6] avcodec_send_frame() 多次发送 NULL 并不会导致编码器中缓存的帧丢失,使用 avcodec_flush_buffers() 可以立即丢掉编码器中缓存帧。因此编码完毕时应使用 avcodec_send_frame(NULL) 来取完缓存的帧,而SEEK操作或切换流时应调用 avcodec_flush_buffers() 来直接丢弃缓存帧
[7] 编码器通常的冲洗方法:调用一次 avcodec_send_frame(NULL)(返回成功),然后不停调用 avcodec_receive_packet() 直到其返回 AVERROR_EOF,取出所有缓存帧,avcodec_receive_packet() 返回 AVERROR_EOF 这一次是没有有效数据的,仅仅获取到一个结束标志
[8] 对音频来说,如果 AV_CODEC_CAP_VARIABLE_FRAME_SIZE(在 AVCodecContext.codec.capabilities 变量中,只读)标志有效,表示编码器支持可变尺寸音频帧,送入编码器的音频帧可以包含任意数量的采样点。如果此标志无效,则每一个音频帧的采样点数目(frame->nb_samples)必须等于编码器设定的音频帧尺寸(avctx->frame_size),最后一帧除外,最后一帧音频帧采样点数可以小于 avctx->frame_size
4.3 API使用例程
4.3.1 解码API例程
// retrun 0: got a frame success
// AVERROR(EAGAIN): need more packet
// AVERROR_EOF: end of file, decoder has been flushed
// <0: error
int av_decode_frame(AVCodecContext *dec_ctx, AVPacket *packet, bool *new_packet, AVFrame *frame)
{
int ret = AVERROR(EAGAIN);
while (1)
{
// 2. 从解码器接收frame
if (dec_ctx->codec_type == AVMEDIA_TYPE_VIDEO)
{
// 2.1 一个视频packet含一个视频frame
// 解码器缓存一定数量的packet后,才有解码后的frame输出
// frame输出顺序是按pts的顺序,如IBBPBBP
// frame->pkt_pos变量是此frame对应的packet在视频文件中的偏移地址,值同pkt.pos
ret = avcodec_receive_frame(dec_ctx, frame);
if (ret >= 0)
{
if (frame->pts == AV_NOPTS_VALUE)
{
frame->pts = frame->best_effort_timestamp;
printf("set video pts %d\n", frame->pts);
}
}
}
else if (dec_ctx->codec_type == AVMEDIA_TYPE_AUDIO)
{
// 2.2 一个音频packet含一至多个音频frame,每次avcodec_receive_frame()返回一个frame,此函数返回。
// 下次进来此函数,继续获取一个frame,直到avcodec_receive_frame()返回AVERROR(EAGAIN),
// 表示解码器需要填入新的音频packet
ret = avcodec_receive_frame(dec_ctx, frame);
if (ret >= 0)
{
if (frame->pts == AV_NOPTS_VALUE)
{
frame->pts = frame->best_effort_timestamp;
printf("set audio pts %d\n", frame->pts);
}
}
}
if (ret >= 0) // 成功解码得到一个视频帧或一个音频帧,则返回
{
return ret;
}
else if (ret == AVERROR_EOF) // 解码器已冲洗,解码中所有帧已取出
{
avcodec_flush_buffers(dec_ctx);
return ret;
}
else if (ret == AVERROR(EAGAIN))// 解码器需要喂数据
{
if (!(*new_packet)) // 本函数中已向解码器喂过数据,因此需要从文件读取新数据
{
//av_log(NULL, AV_LOG_INFO, "decoder need more packet\n");
return ret;
}
}
else // 错误
{
av_log(NULL, AV_LOG_ERROR, "decoder error %d\n", ret);
return ret;
}
/*
if (packet == NULL || (packet->data == NULL && packet->size == 0))
{
// 复位解码器内部状态/刷新内部缓冲区。当seek操作或切换流时应调用此函数。
avcodec_flush_buffers(dec_ctx);
}
*/
// 1. 将packet发送给解码器
// 发送packet的顺序是按dts递增的顺序,如IPBBPBB
// pkt.pos变量可以标识当前packet在视频文件中的地址偏移
// 发送第一个 flush packet 会返回成功,后续的 flush packet 会返回AVERROR_EOF
ret = avcodec_send_packet(dec_ctx, packet);
*new_packet = false;
if (ret != 0)
{
av_log(NULL, AV_LOG_ERROR, "avcodec_send_packet() error, return %d\n", ret);
return ret;
}
}
return -1;
}
4.3.2 编码API例程
int av_encode_frame(AVCodecContext *enc_ctx, AVFrame *frame, AVPacket *packet)
{
int ret = -1;
// 第一次发送flush packet会返回成功,进入冲洗模式,可调用avcodec_receive_packet()
// 将编码器中缓存的帧(可能不止一个)取出来
// 后续再发送flush packet将返回AVERROR_EOF
ret = avcodec_send_frame(enc_ctx, frame);
if (ret == AVERROR_EOF)
{
//av_log(NULL, AV_LOG_INFO, "avcodec_send_frame() encoder flushed\n");
}
else if (ret == AVERROR(EAGAIN))
{
//av_log(NULL, AV_LOG_INFO, "avcodec_send_frame() need output read out\n");
}
else if (ret < 0)
{
//av_log(NULL, AV_LOG_INFO, "avcodec_send_frame() error %d\n", ret);
return ret;
}
ret = avcodec_receive_packet(enc_ctx, packet);
if (ret == AVERROR_EOF)
{
av_log(NULL, AV_LOG_INFO, "avcodec_recieve_packet() encoder flushed\n");
}
else if (ret == AVERROR(EAGAIN))
{
//av_log(NULL, AV_LOG_INFO, "avcodec_recieve_packet() need more input\n");
}
return ret;
}
没有回复内容